More and more of us are hanging on to our vehicles longer.  A company by the name of HIS Markit recently released a report that shows the average age of light vehicles in the U.S. is now 11.8 years.  Light vehicles are cars, SUVs (sport utility vehicles) and CUVs (compact utility vehicles).  In Canada, the average life expectancy of a vehicle there is around 13 years, and in the U.S., it's around 15.  Vehicles are lasting longer these days, and there are several reasons for that. One expert cites better technology and overall quality improvements.  While in past years, vehicles were made mainly of heavier steel components, more modern vehicles contain lighter magnesium and aluminum alloys, high-strength steel, polymers and carbon fiber.  They last longer and reduce the overall vehicle weight, and that can contribute to better fuel economy. Modern internal combustion engine designs have been improved, and since they use more computers, they are more efficie ... read more

Most San Diego drivers are too young to remember life before power steering - cranking those great big steering wheels! It was a pretty good workout. Now power steering is standard. Let's look at how it works. The heart of any power steering system is its pump. The pump pressurizes the power steering fluid that provides assist for steering. Most pumps are driven by a belt that is run by the engine; a few are electrically powered. A high-pressure hose passes fluid from the pump to the steering gear. A low pressure hose returns the fluid back to the pump.These hoses can develop leaks, so it is a good idea for San Diego drivers to have them inspected at every oil change. Low fluid can damage the power steering pump. That is why power steering fluid level is on the checklist for a full-service oil change. The fluid needs to be compatible with the hoses and seals, so check your owner's manual for the right type - or just ask your friendly and knowledgeable ... read more

There's a gauge that many vehicles have that says RPM on it.  And there are a lot of people who either don't pay any attention to it or don't even know what it is. Here's why it's a good gauge to know about. It's called a tachometer, and that "RPM" label means it is measuring how many revolutions per minute (RPM) the engine is turning.  Automotive experts know that a vehicle's engine can be damaged if it turns too fast (revving too high) or too slowly ("lugging" the engine). A tachometer (sometimes called a tach) is almost a "must-have" gauge for vehicles with a manual transmission; the driver has to manually change gears; the tach helps the driver know when revolutions are in the optimal range. Some say you don't need a tachometer if you drive a vehicle with an automatic transmission. It's true that most drivers of automatics don't even look at it.  But there are times when paying attention to the tach can help you prevent an expensive repair. Here's a good example.&nbs ... read more

This may have happened to you.  You drive somewhere and get out of your vehicle only to try closing the door and it just won't stay closed!  What a helpless feeling.  You can't lock it; you can't leave it like it is. Or, let's say you head down to your vehicle to head out to work in the morning and you can't open the door.  What are you going to do now? Vehicle doors take a lot of abuse.  They are opened and closed hundreds of times and we expect them to just keep working perfectly all the time.  They do require a bit of tender loving care.  Let's take a look at two different scenarios of stuck doors. First: the door that won't close.  It's a security issue.  It's also a safety issue.  You can't really safely drive a vehicle with a door that won't close. What if you or a passenger is tossed out?  Sure, some people try to tie a stuck-open door closed or bungee it, but that's dangerous.  It's best to get that vehicle to the serv ... read more

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be.  Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin.  Pretty tall order, wouldn't you say? The parts that face that task daily are called the motor mounts, or engine mounts.  They are usually made of rubber with steel brackets.  Others contain a liquid for vibration and sound isolation.  Most vehicles have three or four motor mounts, and while rubber or hydraulic liquids do a good job of damping the vibrations from the engine, they also have their limitations.  The problem with rubber is that it gets old and brittle.  Plus, if there's an oil leak anywhere in your engine and oil gets on the rubber motor mounts, rubber will deteriorate even more quickly.  As for the liquid motor mounts, they can develop leaks and stop working.  Here are sign ... read more

If you have an internal combustion vehicle, you know it has a lot of hoses that carry various fluids.  And if you have a heater in your vehicle, you'll have heater hoses. A heater hose connects to and from the engine so some coolant can be circulated through a little radiator called a heater core.  In cold weather, that heater core acts as a heat exchanger to heat up your cabin. Even in the hot weather, the heater hoses can prove problematic.  That's because they may remain pressurized even though you're not running your heater.  Heater hoses are made out of tough materials since they must handle heat and pressure.  But even the durable rubber, plastic and metal they are made out of can crack or leak from years of use.  That means coolant can be sprayed out into the engine compartment or leak onto a driveway or garage floor.  You may be able to see a puddle of coolant under your vehicle or perhaps smell the odor of the coolant under the hood.  So ... read more

No one likes to be greeted in the morning by having someone screech at you.  The same goes for a loud, high-pitched noise your vehicle greets you with every time you start the engine.  If you're wondering if that's normal, no, it isn't.  And it is worth getting checked out.  The good news is that it might be nothing serious.  Then again, it may be. The first things to suspect any time you hear a high-pitched sound coming from the engine are belts.  They have tension on them and they're trying to turn lots of different pulleys, pumps and other equipment the engine needs to work properly.  The noise could come from the belts starting to wear out and dry out. If one of those belts breaks at an inopportune time, not only can it strand you somewhere, the damage to the engine could be very expensive to fix. Other things that will cause a high-pitched sound are the pulleys and tensioners.  The tensioners keep the right amount of pressure on the belts an ... read more

You may have had a friend whose vehicle was the victim of hungry rodents.  After all, mice, rats and squirrels—even rabbits—have been known to gnaw on wires in engine compartments, causing vehicle electrical systems to go haywire.  They can disable a vehicle completely and be very expensive to fix. In 2017, some drivers noticed their vehicle's wiring was being chewed and found out the automaker was using a relatively new material for covering their wires: soy.  Many of the repairs to their new vehicles weren't covered under warranty by the manufacturer when it was discovered rodents were eating the wiring.  So the owners filed a class action suit, saying the soy covering was essentially baiting the critters.  The automakers tell a different story, saying mice, rats and squirrels have been chewing through wire insulation long before it was made out of soy.  Regardless of what the insulation is made of, vehicle owners should make sure rodents are ... read more

Perhaps you've heard someone use the term "loose steering." And it's pretty much what it sounds like.  You turn the steering wheel and the vehicle's wheels don't seem to go exactly where you thought you were pointing them.  You have to constantly make steering adjustments.  Loose steering is sloppy steering, and it can be a safety hazard.  You need to be able to control your vehicle with pretty much the same precision as the way it was when it came off the assembly line.   If the steering in your vehicle is starting to feel loose and sloppy, there may be some significant suspension issues that need examining by a trained technician. How do you know if your vehicle needs to be looked at? Try turning the steering wheel and see how much play is in it.  One rule of thumb: if you can turn it the distance of a quarter and a dime placed side by side without seeing the outside wheels move, it's time to have it inspected by one of our technicians. Our John's A ... read more

Your vehicle's engine makes a lot of heat when it's powering you down the road, so it needs a way to get rid of that energy.  That's why your vehicle has a cooling system, complete with a radiator and one or two radiator fans, also called cooling fans.  Those fans make sure air keeps moving across the radiator so that the heat stored in the coolant can be dissipated outside when the vehicle is stopped or not traveling fast. Radiator fans can develop problems and can stop working properly or stop working altogether.  Some signs to look for? If you're driving slowly and idling and you see your temperature gauge moving toward the red or hot zone, that could spell trouble.  Another thing you may notice when a radiator fan is failing is that there may be a loud noise coming from the engine compartment. There are two types of radiator fans.  One is mechanically connected to the engine and uses the engine's rotational energy to turn it.  The other is an electric ... read more